購買請直接下標ㄡ 記得下標前請先看關於我內容 謝謝您
體PERFECT -面銅+ ( PSC + )導線:完美 - 表面銅+有一個驚人的光滑和純淨的表面。專有的金屬加工技術可保護電線的表面上繪製和製造的每個階段。當高純度低氧銅保持為柔和,純正,光滑越好,它成為一個奇妙的低失真PSC +導體。 PSC +是通過應用相同的特殊技術,以超純銅製造。由此產生的音質更加集中和簡單地以較少的方式。 30多年來AUDIOQUEST率先使用卓越的金屬,然而,即使我們受到了巨大的飛躍,性能成為可能與完美,表面技術感到驚訝。 PSC +簡單地優於所有以前提供的銅金屬不惜任何代價。悉尼的所有導線都堅固。在常規的電纜股線之間的電和磁的相互作用是失真的最大來源,常造成有些臟,刺耳的聲音。實心導體是朝著實現悉尼的很乾淨的聲音根本。
聚乙烯空管絕緣:任何固體材料相鄰導體實際上是一個不完美的電路的一部分。電絕緣性和電路板材料全部吸收能量(虧損) 。其中的一些能量被存儲,然後釋放失真。悉尼的所有導體採用PE空氣管絕緣,因為空氣中吸收旁邊沒有能量,而聚乙烯是低損耗,具有良性的變形輪廓。 PE空氣管絕緣導致少得多的離焦的共同與其它材料的影響。
碳基3層噪聲 - 散熱系統( NDS ) : 100 %屏蔽覆蓋率是很容易。從調節設備的接地參考抓獲防止射頻干擾要求AQ的噪音散熱系統。金屬和碳合成物加載預防大多數的RFI到達設備的接地平面。
非對稱雙平衡幾何:目的設計用於單端應用,非對稱雙平衡幾何提供了一個相對較低的阻抗在地面上更豐富,更動態的體驗。雖然許多單端的電纜設計使用單一的路徑為接地和屏蔽,雙平衡設計分開的兩個用於清潔,更安靜的性能。
冷焊接DIRECT-鍍銀純紫銅RCA插頭:這個插件設計允許的連接缺乏焊料,這是失真的常見原因。因為地面殼蓋上,而不是機械加工,金屬可以被選擇用於低失真,而不是機械加工性。紫色的銅提供了一個更清潔,更清晰的聲音過鍍鎳或金屬無氧銅於競爭廠商的插頭常見。直接鍍銀提供了一個走向更加清晰,做任何傷害到信號更重要的步驟。...
Sydney The
Sydney Harbour Bridge is the tallest and widest steel-arch bridge in
the world, and the fifth longest. The “Coathanger” (the bridge’s
nickname) is just behind the Sydney Opera House for worldwide
recognition as a symbol of Sydney, and as a symbol for all of Australia.
An organized ‘Bridge Climb’ is offered many times a day to the top of
the bridge, offering a truly exceptional view of Sydney’s amazing harbor
from 134 meters (440 ft) above the water. SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS: Perfect-Surface
Copper+ has an astonishingly smooth and pure surface. Proprietary
metal-processing technology protects the wire’s surface at every stage
of drawing and fabrication. When high-purity low-oxide copper is kept as
soft, pure and smooth as possible, it becomes a wonderfully
low-distortion PSC+ conductor. PSC+ is manufactured by applying the same
exceptional technology to an ultra-pure copper. The resulting sound
quality is even more focused and simply less in the way. For over 30
years AudioQuest has pioneered the use of superior metals; yet even we
were surprised by the huge leap in performance made possible with
Perfect-Surface Technology. PSC+ simply outperforms all previously
available copper metals at any price. All of Sydney’s conductors are
solid. Electrical and magnetic interaction between strands in a
conventional cable is the greatest source of distortion, often causing a
somewhat dirty, harsh sound. Solid conductors are fundamental toward
achieving Sydney’s very clean sound. POLYETHYLENE AIR-TUBE INSULATION: Any
solid material adjacent to a conductor is actually part of an imperfect
circuit. Wire insulation and circuit board materials all absorb energy
(loss). Some of this energy is stored and then released as distortion.
All of Sydney’s conductors use PE Air-Tube Insulation because air
absorbs next to no energy, and Polyethylene is low-loss and has a benign
distortion profile. PE Air-Tube Insulation causes much less of the
out-of-focus effect common to other materials. CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS):
100% shield coverage is easy. Preventing captured RF Interference from
modulating the equipment’s ground reference requires AQ’s
Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent
most RFI from reaching the equipment’s ground plane. ASYMMETRICAL DOUBLE-BALANCED GEOMETRY:
Purpose designed for single-ended applications, Asymmetrical
Double-Balanced Geometry offers a relatively lower impedance on the
ground for a richer, and more dynamic experience. While many
single-ended cable designs use a single path for both the ground and the
shield, Double-Balanced designs separate the two for cleaner, quieter
performance. COLD-WELDED DIRECT-SILVER PLATED PURE PURPLE COPPER RCA PLUGS:
This plug design allows for a connection devoid of solder, which is a
common source of distortion. Because the ground shells are stamped
instead of machined, the metal can be chosen for low distortion instead
of machinability. Purple Copper offers a cleaner, clearer sound over
nickel-plated or OFHC metals commonly found in competing manufacturers’
plugs. Direct-Silver Plating offers one more important step toward
greater clarity and doing no harm to the signal.
|