台灣代理公司貨
KH 120 A G - Active Studio Monitor
Technical Data Acoustics Free field frequency response 52 Hz … 21 kHz, ± 3 dB Pass band free field frequency response 54 Hz … 20 kHz, ± 2 dB Self-generated noise (with input gain set to 100 dB for 0 dBu) < 20 dB(A) at 10 cm Total harmonic distortion < 0.5 % at 95 dB SPL at 1 m > 100 Hz Max. SPL in full space / calc. in half space at 3% THD at 1m 105.1 / 111.1 dB SPL (averaged between 100 Hz and 6 kHz) Bass capability: Max. SPL in half space at 3% THD at 1m 104.8 dB SPL (averaged between 50 Hz and 100 Hz) Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m , in typical listening conditions 107 dB(C) SPL Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair) 97 dB(C) SPL (full range) 104 dB(C) SPL (with subwoofer) Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair) 88 / 93 dB(C) SPL (full range) 89 / 94 dB(C) SPL (with subwoofer) Electronics Woofer amplifier, cont.(peak) output power* 50 W (80 W) Tweeter amplifier, cont.(peak) output power* 50 W (80 W) Controller design Analog, active Crossover Frequency 2.0 kHz Crossover Slope (dB/oct.) 24, 4th order Equalization - Bass 0, −2.5, −5, −7.5 dB Equalization - Mid 0, −1.5, −3, −4.5 dB Equalization - High +1, 0, −1, −2 dB Protection circuitry Limiter: low, high Infrasonic filter frequency; slope 30 Hz; 6 dB/oct. Analog Input Impedance, electrically balanced 10k Ohms in position 94/108 dB SPL at 1 m 20k Ohms in position 100/114 dB SPL at 1 m
Input gain control (sensitivity) 0 dB to −15 dB Output level control 94, 100, 108, 114 dB SPL CMRR >56 dB @ 15 kHz Maximum input level 24 dBu Displays and indicators - power on Neumann logo “White” Displays and indicators - limit/clip Neumann logo “Red” Mains Power Supply, voltage; frequency 100-240 V~; 50/60 Hz Power consumption – Idle 20 W Power consumption – Full output AC 200 W Mechanics Cabinet surface finish, color: custom Painted aluminium, metallic anthracite (RAL 7021) Powder-coated aluminium, White (RAL 9016) Operating conditions +10° C to +40° C (+50° F to +104° F), <90% RH, non-condensing Transport/storage conditions −25° C to +70° C (−13° F to 158° F), <90% RH, non-condensing Drivers Magnetically shielded Woofer 130 mm (5.25”) Tweeter 25 mm (1”) Mounting points 2 x M8 on rear panel Product dimensions (height x width x depth), mm (inches) 277 x 182 x 220 mm (10 7/8” x 7 1/8” x 8 5/8”) Packed dimensions (height x width x depth), mm (inches) 415 x 365 x 280 mm (16 3/8” x 14 3/8” x 11”) Internal net volume / external volume 6.5 liters / 9.7 liters Weight 6.4 kg (14.1 lbs) |