全新現貨 NXP TDA8594 I2C-bus controlled 4 × 50 W power amplifier
Operates in legacy mode (non I2C-bus) and I2C-bus mode (3.3 V and 5 V compliant)
Three hardware-programmable I2C-bus addresses
Drives 4 W or 2 W loads
Speaker fault detection
Independent short-circuit protection per channel
Loss of ground and open VP safe (with 200 mW series impedance and a supply
decoupling capacitor of 2200 mF maximum)
All outputs short-circuit proof to ground, supply voltage and across the load
All pins short-circuit proof to ground
Temperature-controlled gain reduction to prevent audio holes at high junction
temperatures
Low battery voltage detection
Offset detection
This part has been qualified in accordance with AEC-Q100