Xvive O1 Tube Squasher Overdrive (展示品出清)

  Main Feature：
 1: FET-based overdrive circuitry allows the Tube Squasher to realistically
emulate the smooth overdrive characteristics of a good vacuum tube amp.
The playing dynamics are tube-like in tone and feel. 
2: The Tube Squasher is a very powerful tone-shaping tool.
3: An internal supply voltage step-up allows more dynamic range and headroom with tight bass tones.
4: It is a low to medium gain overdrive .
 Controls：
  * TONE - shapes color of distorted signal 
  * LEVEL - controls overall volume of effect
  * DRIVE - controls amount of overdrive
  * LO CUT - 2 position switch that can alternate between a fat     full
range tone and a clear, transparent sound featuring mids and highs.
 * Foot Switch toggle effects on/bypass (blue LED “on” indicator)

  Directions：
  * Use a cable from the guitar to the Tube Squasher’s INPUT jack and run
another cable from the Tube Squasher’s OUTPUT jack to the amplifier.
  * Start with the OUTPUT, TONE and GAIN controls at 12 o’clock.
  * Turn the effect on by pressing the footswitch.
  * Rotate the Level knob clockwise to increase the overall volume of the effect
or counterclockwise to decrease it.
  * Rotate the TONE knob clockwise for a brighter sound and counterclockwise
 for a darker sound.
  * Rotate the drive knob clockwise to increase the amount of distortion
and counterclockwise to decrease it.


1: Input Impedance         850KΩ
    Output Impedance      <12 kΩ
2: Noise Floor                  <-84dB
3: Current Draw               40 mA
4: Bypass                          Hardwire
5: Power Supply             9 volts DC
* A-weighted, all controls at mid position