樹梅派Pi 自動散熱風扇

建議售價　$625元

一次付清特價 8 折 500 元

付款方式  跨店分期0利率 3期／6期 超商付款 取貨付款

運　　費 跨店宅配0元免運 單店購物車滿 1000 元(含)以上免運費，未滿者自付運費 郵局 60 元 7-11取貨付款 60 元 7-11純取貨 60 元***

商品所在地 台北市

跨店宅配0元免運   單店購物車   1000萬件商品適用 (說明) {"result":"RDR","rscode":"-501","data":"","msg":""}

加入追蹤 留言版(587) 分享到

產品介紹

Make your Raspberry Pi 4 seriously cool with Fan SHIM! This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch will give your Raspberry Pi significantly better thermal performance. It's whisper-quiet too!

Fan SHIM uses a friction-fit header, so it just slips onto your Pi's pins and it's ready to go, no soldering required! Note that, due to the height of the fan, if you want to use HATs or pHATs with Fan SHIM, then you'll need to use a booster header.

The fan can be controlled in software, so you can do crafty things like toggle it on when the CPU reaches a certain temperature. Use the LED as a handy visual indicator to show fan status, CPU load/temperature, whatever! The tactile switch can also be programmed, so you can use it to toggle the fan on or off, or to switch between temperature-triggered or manual mode.

產品特色

• 30mm 5V DC fan
• 4,200 RPM
• 0.05 m³/min air flow
• 18.6 dB acoustic noise (whisper-quiet)
• Friction-fit header
• No soldering required
• RGB LED (APA102)
• Tactile switch
• Basic assembly required
• Compatible with Raspberry Pi 4 (and 3 B+, 3 A+)
• Python library and daemon
• Pinout

套件內容

• Fan SHIM PCB
• 30mm 5V DC fan with JST connector
• M2.5 nuts and bolts

Assembly

Assembly is really easy, and will take less than two minutes.

1. With the component side of the PCB facing upwards, push the two M2.5 bolts through the holes from below, then screw on the first pair of nuts to secure them and act as spacers.
2. Push the fan's mounting holes down onto the bolts, with the cable side of the fan downwards (as pictured) and the text on the fan upwards. Attach with another two nuts.
3. Push the fan's JST connector into the socket on Fan SHIM.

Software

Our Python library lets you control the fan (on/off), RGB LED, and switch. There's a handful of examples to show you how to use each feature, and a script to install a daemon (a service that runs in the background) that runs the fan in automatic mode, triggering it on or off when the CPU reaches a threshold temperature, with a manual override via the tactile switch.

GitHub user "jane-t" has made a really useful LibreElec add-on to enable CPU temperature-based control of Fan SHIM: https://github.com/jane-t/rpi-fanshim

Tutorial

You can read our Getting Started with Fan SHIM tutorial for a really detailed guide on assembling Fan SHIM and installing the software, with photos for each step of the assembly.

Notes

• When mounting or detaching the fan, or assembled Fan SHIM, do not push on the fan itself, as it is liable to break.
• Be careful to mount your Fan SHIM on the correct pins on your Pi, with the Pi shut down and power disconnected. Shifting it left by one pin or down a full row of pins could cause damage to both the Fan SHIM and the Pi. Check out the photos in our tutorial if you're not sure.
• Not heatsink-compatible!
• Because Fan SHIM uses pin BCM18 to control the fan, and this pin is also used by I2S audio devices, you won't be able to use I2S DACs like pHAT DAC, pHAT BEAT, and the IQAudio boards at the same time as Fan SHIM
• Dimensions: 45x39x11mm

政策宣導

• 為防治動物傳染病，境外動物或動物產品等應施檢疫物輸入我國，應符合動物檢疫規定，並依規定申請檢疫。擅自輸入屬禁止輸入之應施檢疫物者最高可處七年以下有期徒刑，得併科新臺幣三百萬元以下罰金。應施檢疫物之輸入人或代理人未依規定申請檢疫者，得處新臺幣五萬元以上一百萬元以下罰鍰，並得按次處罰。
• 境外商品不得隨貨贈送應施檢疫物。
• 收件人違反動物傳染病防治條例第三十四條第三項規定，未將郵遞寄送輸入之應施檢疫物送交輸出入動物檢疫機關銷燬者，處新臺幣三萬元以上十五萬元以下罰鍰。