產品簡介:
在焊接電阻時是否一直遇到接腳彎曲位置不一的時候,現在電阻接腳彎曲器可以解決你的問題。讓每個電阻彎曲位置一致,增加你的工作效率。這個工具是雙面的分別是給1/4w跟1/2w的電阻使用。
This little piece of notched plastic is a Resistor Lead Bending Tool. Sometimes referred to as a “forming” tool, this little guy provides you with an easy and reliable way to get the exact distance between two resistor leads that you need to PTH soldering. The Resistor Lead Bending Tool is two-sided, with one side offering 0.4"-1.5" spacing for ¼ Watt resistors and the other side offering 0.5"-1.5" spacing for ½ Watt resistors.
We here at SparkFun use a lot of ¼ Watt resistors in out PTH soldering kits and have found that this tool is very handy when soldering a lot of resistors at once or over a longer period of time. To use this tool, simply insert your ¼ Watt or ½ Watt resistor into the desired spacing groove and bend the leads over the edges. It’s that simple!
Note: 1/6 Watt resistors and specific diodes can be used on this tool but you will need to make sure they are centered before attempting to bend them to your desired preference.
產品規格:
- ¼ Watt Resistor Spacing: 0.4"-1.5"
- ½ Watt Resistor Spacing: 0.5"-1.5"
- Made from high impact ABS Plastic